Shop Rates

  • Bench rate: $75/hour
  • Minimum charge: $30
  • Repair estimates: N/C

Restring

Strings not included

  • 6-string steel or bronze – $30
  • 6-string nylon – $50
  • 12-string steel or bronze – $50
  • 12-string nylon – $75

Setup

  • 6-string – $60
  • 12-string – $85
Setups include:
  • Restring
  • Clean & condition fingerboard
  • Check nut height
  • Clean frets
  • Adjust neck angle & truss rod
  • Tighten hardware
  • Adjust bridge saddles
  • Set intonation
  • Set pickup height

String nut replacement

  • Ebony or Bone – $60
  • Tusq – $75
  • Other – ask

Bridge Saddle replacement

  • Ebony or Bone – $60
  • Tusq – $70
  • Other – ask

 Refret

(Prices include setup)

  • Standard full refret – $280

This applies to an unbound, unfinished fretboard with nickel-silver fret wire.
Other circumstances can increase that amount, as follows:

A finished fretboard usually means a clear-finish Fender-style maple fretboard. If the existing frets were installed before the finish was applied, each fret will need to be liberated from the finish. If this isn’t done properly, the existing finish will likely fracture, and require extra attention.

Fretboard Material
  • Finished maple – add  $30
  • Ebony – add $30
  • Richlite -add $30
  • Micarta – add $30
Fret material

(Nickel silver is standard)

  • EVO – add $10
  • Stainless – add $20

Binding

  • Jazz-style (old Gibson) binding – add $40
  • Modern binding – add $40

Other Fret work

  • Level, crown, polish – $150